Manufacturer Arco
The Close chair is as comfortable as it looks: the round backrest makes for comfortable sitting because it shapes itself around you. Its elegance flows from its beautiful simplicity.
Manufacturer Arco
The Close Barstool is an extremely comfortable high chair that can be used in work environments, in private homes and in bars and restaurants. Meaning everywhere you wish to sit high and comfortable. The stool is available in a height of 65 and 75 cm.
Manufacturer Arco
The fully Close bench is the biggest member of the Close family and is every bit as comfortable as it looks. The outer contours of the seat and backrest, which were consciously designed as two distinct shapes, consist of clean, geometric lines. The minimalist shape of the frame reinforces the dynamic elements of the design. Although especially suitable for the dining area, the Close Bench can serve in a range of settings from residential to restaurants and lounges to offices with equal ease.
Manufacturer Arco
Close Lounge is like the rest of the Close family an extremely comfortable Chair. The rounded backrest which measures 71.5 cm in width creates a generous refuge, and the slightly sloping seat allows a relaxed posture. Like the chair and the bench, The Close Lounge is softly padded and organically shaped on the inside, which moulds to the body. This forms a delicate contrast to the smooth contour of the overall piece of furniture.
Work in progress.
Exhibited at Stockholm furniture fair 2017.
The project was my contribution to Danish Design Makers exhibition "Extremely".
From one extreme to the other. I have always been fascinated by products with a built-in capacity to change shape.
A folding chair needs to stretch from one state adapted to the body into another optimized for storage.
At all times it must function aesthetically and ergonomically
and the transformation should take place smoothly and seamlessly. Balancing requirements of the two states is the
main challenge of creating a folding chair; however it often results in more or less successful compromises.
With this particular type of construction and choice of materials I have made it possible to optimise both states, without compromising the other.
The textile adapts and becomes flat when stored. Unfolded it becomes voluminous and offers perfect ergonomic support.
Manufacturer Caneline
Design by Welling / Ludvik
Roll trolley is a mobile side table with a tray you can take with you when moving between indoor and outdoor. Roll bar trolley is the big brother that functions as a storage and a serving table. Roll is made in powder coated aluminium and can be used both indoor and outdoor.
Manufacturer Caneline
Design by Welling / Ludvik
Lean is a stackable dining and lounge chair in powder coated aluminium. Frames for the seat and back are made in die-cast aluminium with woven back and seat.
Manufacturer Caneline
Design by Welling / Ludvik
Lighttube is made in powdercoated aluminium. The lamp is inspired by the danish tradition "Vægter". A man who walked the streets of the city, lighting up and putting out the street-lights as well asensuring public order.
Manufacturer arrmet
Design by Welling / Ludvik
Máni is a series of dining and office chairs with various bases. The shell is made in injection moulded polypropylene plastic and can be offered as fully upholstered or with a upholstered seat cushion.
Manufacturer warmnordic
Design by Welling / Ludvik
The trays are made of solid oak or walnut and available in a classic round shape or in a rectangular version with rounded corners.
Manufacturer warmnordic
Design by Welling / Ludvik
Light stools with organically shaped seats made of solid wood. Inspired by pebbles found on the beach, the seats are slightly asymmetrical exposing the beauty of the wood grain with small differences in shape and structure, this means that every stool is unique.
Manufacturer Fredericia
Design by Welling / Ludvik
Pato is a series of dining and office chairs based on a one piece shell from injection moulded PP plastic with various bases. The edge around the shell is angled to improve comfort for back and legs. The chair also comes fully upholstered, with an upholstered seat or as a moulded 3D veneer shell.
Manufacturer Fredericia
Design by Welling / Ludvik
Pato Lounge is a versatile lounge chair that can be used in hotel lobbies, waiting areas and private homes. With padding and upholstery on both seat and back, and can be with either sledge or swivel base. Pato Lounge is a comfortable chair with a lightweight expression.
Manufacturer Caneline
Design by Welling / Ludvik
Less is a stackable dining chair in powder coated aluminium. Frames for the seat and back are made in die-cast aluminium with legs in aluminium tube. Less comes with a perforated seat and back or as an upholstered version, with or without armrest.
Manufacturer Fredericia
Design by Welling / Ludvik
Pato barstool is a one-piece shell with a range of different bases. The shell is injection moulded PP plastic with its edge angled to improve comfort for back and legs. The chair comes fully upholstered or with an upholstered seat.
Under further development and expected ready in 2017.
In 2015 Danish Design Makers theme was "MY STORY". DDM exhibited at the IMM COLOGNE furniture fair with various project. My contribution was the height adjustable table GRAVITY.
Picture: Kristine Funch and Emilia Therese
See/Read more: DDM
Manufacturer Fredericia
Design by Welling / Ludvik
Mesa is a dinner and conference table system. The frame is constructed from die-cast, powder coated aluminum and extruded aluminium profiles. The tabletop is made of either laminate or linoleum. The table comes in different sizes.
Why should a folding chair be a secondary solution? What if the 'common ide' for a folding chair is reversed? Look at it as a comfortable dining chair with high aesthetics that can be stored away when needed.
Manufacturer Fredericia
Design by Welling / Ludvik
Pato is a series of dining and office chairs based on a one piece shell from injection moulded PP plastic with various bases. The edge around the shell is angled to improve comfort for back and legs. The chair also comes fully upholstered or with an upholstered seat.
Manufacturer Caneline
Design by Welling / Ludvik
Area stool consists of a seat/table top in reinforced aluminium sheet with legs in aluminium tube. Area table is powder coated and comes in different sizes and colors. Area stool can be used both indoor and outdoor as well as functioning as a side table..
Manufacturer Fredericia
Design by Welling / Ludvik
Sola is a series of café and bar tables with a column base in powder coated steel and a table top in laminate. It comes with round, square and rectangular table tops, in various sizes and colors.
.
Manufacturer Caneline
Design by Welling / Ludvik
Cut is a series of stools and tables made from laser cut aluminium sheets, welded together and powder coated. It is created and assembled to optimize the use of the material, and minimize waste material. Cut is designed for both indoor and outdoor use.
Manufacturer Caneline
Design by Welling / Ludvik
Area consists of a table top in reinforced aluminium sheet with legs in aluminium tube. Area table is powder coated and comes in different sizes and colors. The table can be used both indoor and outdoor.
Manufacturer canline.com
Design by Welling / Ludvik
Kapa is a series of lounge furniture. Both chair and sofa are stackable. Frame is made of powder coated aluminium. Cushion can be taken off for vashing.
Manufacturer Erik Jørgensen
Design by Welling / Ludvik
Lagoon is a fully upholstered modular sofa, either with a plinth and base in solid wood or a powder coated metal base. The chaiselong module has an integrated storage unit and a moveable tray. It comes in various sizes and optional choice of upholster in textiles or leather.
Miscellaneous projects
